Product Highlights

- Made to Power LED Tubes.

- One AC Port.

- 2 USB ports.

- Powered via D-Tap/P-Tap.

Key Features

• The Kondor Blue "SPARK 150" is a D-Tap to AC Power Supply Inverter that allows for Mobile Power via a standard Wall Plug Outlet.

• Made for powering Quasar T8 T12 X Crossfade LED Lights House Bulbs and More! (P-Tap V-Mount Gold Battery). LED Tubes are so popular, lightweight, and easy to rig but powering them can become a challenge thus defeating their portability and ease of use, especially when on location. This SPARK 150 solves the issue.

• This is also a great way to power a DIT station or other on-set electronics such as portable fans, field monitors, motorized sliders, etc. This tool could become a Mobile Charging Station for smaller batteries as well whether it be for LPE6 or DSLR batteries... The possibilities are limitless!

• INPUT RANGE 12-17V, OUTPUT AC110V, 100W CONTINUOUS - 150W MAXIMUM - 250W PEAK OUTPUT COMPATIBLE WITH V-MOUNT OR GOLD MOUNT BATTERIES (Output Dependent on Battery Used) POWER ANYTHING ON SET UP TO 150 WATTS ON LOCATION USING YOUR D-Tap/P-Tap BATTERIES MADE FOR QUASAR SCIENCE TUBES AND ON SET ELECTRONICS.

Dimensions 

• Output Connectors: 1 x AC Plug, 2 x USB Type-A Ports

• Input Connector: 1 x D-Tap

• Input Power: 7 to 24 VDC

• Output Power: 110 VAC, 100 to 150 W, 250 W Maximum

• Dimensions: 5"x4”x2"

• Cable Length: 12-24"

• Weight: 10.8 oz

Product Highlights

D-Tap 12V/14.8V  4-Way Tap Splitter

- 12V Regulated D-tap Port.

- Power Multiple Devices.

- 1/4"-20 Thread.

- Aerospace Grade Aluminum.

Key Features

• Machined from Aerospace Grade Aluminum, our KONDOR BLUE D-Tap Hub features a high-quality Nylon Braided Cable with Reinforced Cable Joints. Unlike other brands, our hub features a [Regulated] 12V Port along with three 14.8V Ports and an LED Indicator Light. This Hub was made with Creators in mind, offering a 1/4”-20 thread to mount this Power Station to almost any Rig or Accessory.

• Take our KONDOR BLUE D-Tap Hub on any shoot with confidence. With its premium build quality and KONDOR BLUE Lifetime Warranty, you’ll never have to buy another device like it. Ever again.

• Compatible with ARRI Alexa, Sony Venice, Red, Blackmagic, Canon, Z Cam, etc.

SPECS

• Connector 1: Male 2-Pin D-Tap.

• Connector 2: 1x Female Regulated 12V D-Tap Socket | 3x Female 14.8V D-Tap Sockets.

• Cable Length: 16".

• Weight: 3 oz.

• All four ports will share a max of 12 Amps.

• The 12V port max output is 3.5A.

* Max input Voltage is 26V

For Sony Alpha a1, a9 II, a9, a7R IV, a7R III, a7 III, a7 IV, a7S III and a6600 Cameras.

Key Features

• Connect D-Tap Sources to Your Sony Camera
• D-Tap to Dummy Battery Connectivity
• 16" Contracted Length
• 36" Extended Length
• Input Voltage: 12V - 17V;Output Voltage: 8V (Regulated); Output Current: 2A

Key Features:

• Connect D-Tap Sources to Your Device
• D-Tap to Dummy Battery Connectivity
• 16" Contracted Length
• 36" Extended Length
• Input Voltage: 12V - 17V; Output Voltage: 8V (Regulated); Output Current: 2A

This Coiled D-Tap Cable allows you to connect a D-Tap power source to Sony cameras as well as many other devices that use Sony L-Series batteries such as SmallHD Monitors and LED Lights. The cable features a D-Tap connector on one end and L-Series type dummy battery that installs into your device on the other.

• Connect D-Tap Sources to Your Device
• D-Tap to Dummy Battery Connectivity
• 16" Contracted Length
• 36" Extended Length
• Input Voltage: 12V - 17V; Output Voltage: 8V (Regulated); Output Current: 2A

The Coiled D-Tap to LP-E6 Dummy Battery Cable allows you to power any monitor or camera from a D-Tap power source. It regulates the 12-17V input voltage range of D-Tap sources to deliver a 7.4V output to your monitor via the dummy battery.

For Sony Alpha a1, a9 II, a9, a7R IV, a7R III, a7 III, a7S III and a6600 Cameras.

*ONLY use with Kondor Blue V Mount or Gold Mount Battery Plates.

Key Features

• Connect our V-Mount Plate to Your Sony Camera
• DC to Dummy Battery Connectivity
• 16" Contracted Length
• 36" Extended Length
• Output Voltage: 8V (Regulated through our Battery Plate); Output Current: 2A

For LUMIX S5 GH5 GH5S GH6 G9

Key Features

• Connect D-Tap Sources to Your Panasonic LUMIX Camera
• D-Tap to Dummy Battery Connectivity
• 16" Contracted Length
• 36" Extended Length
• Input Voltage: 12V - 17V; Output Voltage: 8V (Regulated); Output Current: 2A

For LUMIX S1, S1H, S1R

*ONLY use with Kondor Blue V Mount or Gold Mount Battery Plates.

Key Features

• Connect our Battery Plates to Your Panasonic LUMIX Camera
• 1.35 DC to Dummy Battery Connectivity
• 16" Contracted Length
• 36" Extended Length
• Input Voltage: 12V - 17V
• Output Voltage: 7.4/8.4V (Regulated through our Battery Plate); Output Current: 2A

Panasonic Lumix GH6 DC Coupler - DMW-DCC17 Also For S5 GH5S GH5 G9 

*ONLY use with Kondor Blue V Mount or Gold Mount Battery Plates.

Key Features

• Connect our Battery Plates to Your Panasonic Lumix Camera
• 1.35 DC to Dummy Battery Connectivity
• 16" Contracted Length
• 36" Extended Length
• Input Voltage: 12V - 17V
• Output Voltage: 7.4/8.4V (Regulated through our Battery Plate); Output Current: 2A

Key Features:

• Connect D-Tap Sources to Your Device
• D-Tap to Dummy Battery Connectivity
• 16" Contracted Length
• 36" Extended Length
• Input Voltage: 12V - 17V; Output Voltage: 8V (Regulated); Output Current: 2A

This Coiled D-Tap Cable allows you to connect a D-Tap power source to Nikon cameras. The cable features a D-Tap connector on one end and dummy battery that installs into your camera on the other.