Start/Stop REC button is compatible with popular cameras such as RED Komodo/Raptor, Canon, Fuji, Z CAM, URSA Mini Pro, LUMIX, Sony Cameras, and many more! (NOT the BMPCC yet)*

*The Talon XL trigger handle does not include a start/stop cable. Browse our collection of shutter release cables to add to your purchase. 

Key Features:

• Remote Start/Stop REC Button
• 2x Cold Shoes
• 2x Nato Rail
• 3x ⅜” ARRI Mount
• 1x Back Facing  ¼” Thread
  
• Built-in 4mm Hex Tool
• Molded Rubber Grip
• Bubble Level
• NATO Clamp 

Product Description:

The Talon XL camera rig top handle is the bigger brother to our Talon Top Handle. It features the same molded rubber pad, which has been contoured to perfectly fit your hand.ed to perfectly fit your hand.

Not only is the Talon XL 20mm/.75” longer, it also features a remote trigger run/stop button. This makes operating the camera from the Talon XL rig top handle a dream.

Much like its namesake, the Talon XL camera rig top handle is meant to clasp all of your accessories with a range of mounting options. Starting at the front of the top handle, a short NATO rail allows for quick accessorizing. This top handle also allows you to add any of our Monitor Mounts via the ⅜” ARRI Mount. On the top side of the handle, it features a REC button and cold shoe mount, two more ⅜ ARRI mounts pre-loaded with ⅜ to ¼ bushings, a NATO rail, and our signature bubble level. Finally, the back side has an additional cold shoe mount with a threaded ¼” 20 mount perfect for wireless mic receivers or other small accessories.

The Talon XL mounts via a NATO clamp and has a built-in 4mm hex tool to save you in a pinch with mounting other popular accessories. Designed with versatility and comfort in mind, the Talon XL is ready for anything.

Tech Specs:

• 200 gm/7.0 oz
• Length: 140mm/5.5”
• Mounted Height: 67.5mm/2.6”

COMPATIBLE WITH:

• Canon EOS R, RP, R3, R5, R5C, R6, R6II, R7, R10
• Canon Cinema C70, C100, C200, C300, C500 all versions
• Canon DSLR: All cameras with a 2.5mm or N3 trigger port
• Sony Alpha camera: A7sII, A7IV, A7RV, A1, A9II, A9, A7R IV, A7R III, A7R II, A7R, A7S II, A7S, A7III, A7II, A7, a6600, a6500, a6400, a6300, a6000, a5100, a5000, a3500, a3000, ILCE-QX1
• Sony FX Cinema Line: FX30, FX3, FX6, FX9
  
• Sony Compact/Camcorders: RX1R II, RX10 IV, RX10 III, RX10 II, RX10, RX100 VII, RX100 VI, RX100 VA, RX100 V, RX100 IV, RX100 III, RX100 II, RX0 II, RX0, HX99, HX90V, HX80, HX60V, HX50V, HX400V, HX300, WX500, QX30, ZV-1, FDR-AX100, FDR-AX30, FDR-AX33, FDR-AV43, FDR-AX53, FDR-AX700, FDR-AXP35, HDR-CX230, HDR-CX240, HDR-CX320, HDR-CX330, HDR-CX380, HDR-CX405, HDR-CX430V, HDR-CX440, HDR-CX455, HDR-CX480, HDR-CX485, HDR-CX675, HDR-CX900, HDR-GW66V, HDR-GWP88V, HDR-PJ220, HDR-PJ230, HDR-PJ270, HDR-PJ275, HDR-PJ340, HDR-PJ350, HDR-PJ380, HDR-PJ430V, HDR-PJ440, HDR-PJ540, HDR-PJ650V, HDR-PJ660V, HDR-PJ670, HDR-PJ675, HDR-PJ790V, HDR-PJ810, HDR-PJ820
• Lumix S1, S1R, S1H, S5, S5II, S5IIX
• Lumix GH6, GH5, GH5 II, GH5S, GH4, GH3, GH2, GH1, G95, G9, G8, G7, G6, G5, G3, G2, G85, G10, G1, GX8, GX7, GX1, GF1,
• Lumix DMC-FZ2500, DMC-FZ1000, DMC-FZ300, DMC-FZ200, DMC-FZ150, DMC-FZ100
• Fuji XT3, XT4, XT5, XH2, XH2s,   X-T2, X-T1, X-T30, X-T20, X-T10, X-T100, X-Pro3, X-Pro2, X-E3, X-E2S, X-E2, X-A5, X-A10, X-H1, X100F, X100T, X70, X30, XF10, GFX 50S
• Blackmagic Design URSA 4K, URSA Mini All versions, BMCC 2.5K, BM Production 4K, BM Studio Camera, Micro Cinema, Micro Studio, Original BMPCC 1080
  
• RED Komodo, V Raptor, V Raptor XL, Rhino
  
• Z Cam E2-S6, E2-S6G, E2-F6, E2-F8, E2, E2C, E2-M4

Choose Your Remote Trigger Cable (Sold Separately): HERE

*Quick Guide for Camera Control Switch Modes:

"P": Canon EOS R, EOS R5C, EOS R6, LUMIX S1H, Panasonic GH5, S5, Fuji XT4, RED KOMODO, 

"S": All Sony Cameras, URSA Mini, C300, C500, C70, Z CAM

PRODUCT DESCRIPTION

Who doesn’t love a good camera multi-tool? In our years of prepping on and off set, we’ve used the gamut of tools and been left wanting. Have you ever fallen in love with a tool only to have an essential bit strip or break? Or is a critical tool not included causing you to have to carry multiple…multi-tools? Ya, it got annoying for us too so we set out to make one tool system to be the EDC (Everyday Carry) Multi-Tool.

The KONDOR BLUE EDC Multi-Tool is a bit-based camera multi-tool using the ever-popular ¼” shank bits which allows us to maximize the amount of bits you can carry, limit weight, and provide unlimited configuration. Bits are better, period. They’re non-proprietary to the tool and if one of the hardened still bits happens to strip, break, or get left behind, it’s easy to replace. 

The Zippo-inspired flip lid on this EDC Multi-Tool with Bit Driver has an ever-so-satisfying magnetic closure. Within the bit chamber, 5x ¼” x 1” bits can be stored. At the end of the tool, 3x additional ¼” x 2” bits can be stored and held in by spring-loaded ball bearings. These slots have even been calibrated to have playful tactile feedback. Press the bits in and they’ll spring back into place making the EDC Multi-Tool double as a fun fidget toy. The stock 2” bits are 3mm, 4mm, and flat head are the most commonly used amongst camera accessories so the extra length will be helpful for a range of applications.

The EDC Multi-Tool features two main modes: Driver and Torque. In either mode, bits are held magnetically in place. Driver mode uses bits at the top of the tool for a quick screwdriver-like feel. Torque mode inserts the bits on the side—either at the end or the center—to provide more leverage when needing to get a little extra push when tightening or loosening a bolt. You can even load bits at multiple locations at a time speeding up rig assembly time.

Multi-tools often seem to have legs of their own so we’ve included a lanyard loop at the top of the belt clip so you can know where your camera multi-tool is at all times. The EDC Multi-Tool also features a bubble line level and a large magnet for holding spares. Precision machined from aerospace-grade aluminum, the KONDOR BLUE EDC Multi-Tool is in a league of its own. It is lightweight, incredibly strong, and durable. It’s an easy add-on to fit any of your assembly workflows.