Watch the FX3 in action with our Gear Here.

Rig Consists Of:

• 1x Sony FX3 Cage with Remote NATO Top Handle
• 1x FX3 Top NATO Rail
• 1x ARRI/501 Universal Baseplate
• 1x Sony E Mount Cine Cap
• 2x PPSH 15mm Rods (8 Inches)

Space Gray Kondor Blue Cage Features Include:

• Built-in Arca Swiss Plate on the bottom of the cage, allowing compatibility with the new DJI Ronin.
• NATO rails on all sides of the cage.
• The NATO rail on top is removable, allowing for the use of Sony's FX3 XLR top handle.
• Multiple 1/4" and four 3/8" threaded holes with ARRI Locator Pins for Anti-twist accessories such as our Mini Quick Release Plates.
• *NEW* Safety Pin Cold Shoe: making sure your cold shoe accessories will NEVER slip out.
• Built-in Hex tools on the bottom of the cage.
• Modular design, allowing you to remove side plates if desired.

Top Handle Features:

• Start/Stop Record Button. Supports both Sony LANC and Panasonic Protocols, providing Compatibility for most cameras such as Z CAM, Blackmagic, Sony, Canon, Panasonic, JVC, etc.
• Five 3/8" threaded holes with ARRI Locator Pins for Anti-twist Accessories such as our Mini Quick Release Plates
• Over Eighteen 1/4" hole options for mounting accessories
• 15mm Side Rod Support for EVF or Monitors
• Cold Shoe mounts on each end of the Handle
• Mounted via NATO Rail and can also slide on to both Left and Right Sides of Cage

Rig Weighs: 24 oz

Dimensions of Base Rig without rods: 9.5” x 4.5” x 3” (Height is 7” without top handle)

Optional Accessories Include: FF Single Rod Adapter, ARRI Rosette Adapters, 15mm Rods, 501 ARRI Baseplate, Rosette Extension Arms, Rosette Handgrips, Mini Quick Release Plates, Cine Magic Arm, HDMI Clamp, etc.

Watch the FX3 in action with our Gear Here.

Rig Consists Of:

• 1x Sony FX3 Cage with Remote NATO Top Handle
• 1x ARRI/501 Universal Baseplate
• 1x Sony E-Mount Cine Cap
• 2x PPSH 12" Rods
• 1x Rosette Arm Bundle
• 1x V-Mount Battery Plate
• 1x FZ100 Dummy Battery to DC 1.35
• 1 x Shoulder Pad Air

Space Gray Kondor Blue Cage Features Include:

• Built-in Arca Swiss Plate on the bottom of the cage, allowing compatibility with the new DJI Ronin.
• NATO rails on all sides of the cage
• The NATO rail on top is removable, allowing for the use of Sony's FX3 XLR top handle.
• Multiple 1/4" and four 3/8" threaded holes with ARRI Locator Pins for Anti-twist accessories such as our Mini Quick Release Plates.
• *NEW* Safety Pin Cold Shoe: making sure your cold shoe accessories will NEVER slip out.
• Built-in Hex tools on the bottom of the cage.
• Modular design, allowing you to remove side plates if desired.

Top Handle Features:

• Start/Stop Record Button. Supports both Sony LANC and Panasonic Protocols, providing Compatibility for most cameras such as Z CAM, Blackmagic, Sony, Canon, Panasonic, JVC, etc.
• Five 3/8" threaded holes with ARRI Locator Pins for Anti-twist Accessories such as our Mini Quick Release Plates
• Over Eighteen 1/4" hole options for mounting accessories
• 15mm Side Rod Support for EVF or Monitors
• Cold Shoe mounts on each end of the Handle
• Mounted via NATO Rail and can also slide on to both Left and Right Sides of Cage
• Includes Start/Stop cable

Rig Weighs: 3.8 lbs

Dimensions of Base Rig without rods: 9.5” x 4.5” x 3” (Height is 7” without top handle)

Optional Accessories Include: FF Single Rod Adapter, ARRI Rosette Adapters, 15mm Rods, 501 ARRI Baseplate, Rosette Extension Arms, Rosette Handgrips, Mini Quick Release Plates, Cine Magic Arm, HDMI Clamp, etc

This universal lens mount is compatible with our Canon and RED cage systems and popular lens adapters. 

This bracket solves the issue many operators face when adapting lenses on their cameras and dealing with loose lens mounts with too much play. This universal lens mount is designed to work on our Kondor Blue cages but may also work on other models as well. It has been tested effectively with brands such as Metabones, Canon, Wooden Camera, BOR, Revolva, and more.

The lens bracket mounts onto the cage using the included screws. It comes with 3 different height and screw options to allow universal compatibility and prevent any movement or twisting that may occur when using a Speedbooster or adapter with your lens.

Weight: 1.3 oz  

RED Komodo, Canon C70 and R5

Watch the A7S3 in action with our Gear Here. 

*Top handle Includes Start/Stop cable

Eyelet Strap Holes compatible with A7iv, A1, A7Riv, A7Siii

Space Gray Kondor Blue Cage Features Include:

• Quick Release Arca Swiss Plate System
• NATO Rails on Left and Topside of the Cage
• Multiple 1/4" & 3/8" threaded holes with ARRI Locator Pins for Anti-twist Accessories such as our Mini Quick Release Plates
• 3 Cold Shoes on Top Handle and Cage.
• Optional Side Rosette Add-On Sold Separately
• Optional Open Hot Shoe Design for Sony XLR K3M Module
• Optional Hot Shoe Point Of contact for ultimate rigidity

Top Handle Features:

• Start/Stop Record Button. Supports both Sony LANC and Panasonic Protocols providing Compatibility for most cameras such as Z CAM, Blackmagic, Sony, Canon, Panasonic, JVC, etc.
• Five 3/8" threaded holes with ARRI Locator Pins for Anti-twist Accessories such as our Mini Quick Release Plates
• Over Eighteen 1/4" hole options for mounting accessories
• 15mm Side Rod Support for EVF or Monitors
• Cold Shoe mounts on each end of the Handle
• Mounted via NATO Rail and can also slide onto both Left and Right Sides of the Cage
• Comfortable and sleek Wood Grip Design

Dimensions: 5" x 3" x 1"

Weighs: 6 oz

Optional Accessories include FF Single Rod Adapter, ARRI Rosette Adapters, 15mm Rods, 501 ARRI Baseplate, Rosette Extension Arms, Rosette Handgrips, Mini Quick Release Plates, Cine Magic Arm, HDMI Clamp, etc.

* Cine Cap sold separately. 

*NEW A7IV Replacement Side plates will be shipped this month to accommodate a wider camera body.

Watch the A7S3 in action with our Gear Here.

A7iv, A1,  A7Riv, A7sii, A7Siii

Sony A1/A7 Series Rig Consists Of:

• 1x Sony A7 Series Cage with LANC NATO Top Handle
• 1x ARRI/501 Universal Baseplate
• 1x Sony Camera Body Cap
• 2x PPSH 15mm Rods (8 Inches)

Dimensions of Base Rig without rods: 9.5” x 4.5” x 3” (Height is 7” without top handle)

Watch the A7S3 in action with our Gear Here.

A7iv, A1, A7Riv, A7Sii, A7Siii

Rig Consists Of:

• 1x Sony A7 Series Cage w/ Remote Trigger Top Handle
• 1x ARRI/501 Universal Baseplate
• 1X Rosette Arms, Grips & Clamp Bundle
• 1x Cine V-Mount plate
• 1x Sony E-Mount Cine Cap
• 2x 12" PPSh 15mm Aluminum Rods
• 1X FZ100 Dummy Battery to DC 1.35/3.5
• 1 x Shoulder Pad Air

Kondor Blue’s top handle has been tested with popular cameras such as RED KOMODO, Canon EOS R/R5/R6, Fuji X-T4, C500, C70, C300, Z CAM Flagship, URSA Mini Pro, GH5, LUMIX S1H, Sony A7 Cameras, and many more!

*Includes a 2.5 to 2.5 LANC cable and a 2.5 to micro USB remote cable.

(Komodo and N3 Shutter cables must be purchased separately unless purchased with a cage as a bundle.)

Top Trigger Handle Features:

• Start/Stop Record Button. Supports both Sony LANC and Panasonic Protocols providing Compatibility for most cameras such as Z CAM, Blackmagic, Fuji, Sony, Canon, Panasonic, JVC, etc.
• Five 3/8" threaded holes with ARRI Locator Pins for Antitwist Accessories such as our Mini Quick Release Plates
• Over Eighteen 1/4" hole options for mounting accessories
• 15mm Side Rod Support for EVF or Monitors
• Cold Shoe mounts on each end of the Handle
• Mounted via NATO Rail and can also slide on to both Left and Right Sides of Cage
• Comfortable and Ergonomic Grip Design

Optional Accessories Include: FF Single Rod Adapter, T5 SSD Holder, ARRI Rosette Adapters, 15mm Rods, 501 ARRI Baseplate, Rosette Extension Arms, Rosette Handgrips, Mini Quick Release Plates, Cine Magic Arm, 2 Pin LEMO to D-Tap Cable

Dimensions: 5” x 3” x 1”

Weighs: 6 oz

*Quick Guide for Camera Control Switch Modes:

"P": Canon EOS R, EOS R5C, EOS R6, LUMIX S1H, Panasonic GH5, S5, Fuji XT4, RED KOMODO, 

"S": All Sony Cameras, URSA Mini, C300, C500, C70, Z CAM

*The Trigger Handle does not include a Start/Stop cable. Browse our collection of shutter release cables. 

This Trigger Pro Top Handle Features:

• Start/Stop Record Button. It supports both Sony LANC and Panasonic Protocols providing compatibility for most cameras such as Z CAM, Blackmagic, Fuji, Sony, Canon, Panasonic, JVC, etc.
• Built-In NATO Rail
• Five 3/8" threaded holes with ARRI Locator Pins for Anti-twist Accessories such as our Mini Quick Release Plates
• Over Eighteen 1/4" hole options for mounting accessories
• 15mm Side Rod Support for EVF or Monitors
• Cold Shoe mount
• Mounted via NATO Clamp
• Comfortable and Ergonomic Grip Design

Dimensions: 

Weighs: 

*Quick Guide for Camera Control Switch Modes:

"P": Canon EOS R, EOS R5, EOS R6, LUMIX S1H, Panasonic GH5, S5, Fuji XT4

"S": All Sony Cameras, URSA Mini, C300, C500, Z CAM

Add comfort and function to your Sony FX3 XLR Top Handle.

SONY FX3 XLR HANDLE UNIT FEATURES:

• NATO rail along the top 
• Cold Shoe receiver on the back end
• 6x 1/4" Threads and 4x ARRI 3/8 mounting points
• Extends the length of the handle for a much better ergonomic grip 

Watch the FX3 in action with our Gear Here.

Space Gray Kondor Blue Cage Features Include:

• Built-in Arca Swiss Plate on the bottom of the cage, allowing compatibility with the new DJI Ronin.
• NATO rails on all sides of the cage
• The NATO rail on top is removable, allowing for the use of Sony's FX3 XLR top handle. *SOLD SEPARATELY*
• Multiple 1/4" and four 3/8" threaded holes with ARRI Locator Pins for Anti-twist accessories such as our Mini Quick Release Plates.
• *NEW* Safety Pin Cold Shoe: making sure your cold shoe accessories will NEVER slip out.
• Built-in Hex tools on the bottom of the cage.
• HDMI Clamp Included
• Modular design, allowing you to remove side plates if desired.
• Sony Camera Body Cap  *SOLD SEPARATELY*

Top Handle Features:

• Start/Stop Record Button. Supports both Sony LANC and Panasonic Protocols, providing Compatibility for most cameras such as Z CAM, Blackmagic, Sony, Canon, Panasonic, JVC, etc.
• Five 3/8" threaded holes with ARRI Locator Pins for Anti-twist Accessories such as our Mini Quick Release Plates
• Over Eighteen 1/4" hole options for mounting accessories
• 15mm Side Rod Support for EVF or Monitors
• Cold Shoe mounts on each end of the Handle
• Mounted via NATO Rail and can also slide on to both Left and Right Sides of Cage

Weighs: 9 oz

Optional Accessories Include: FF Single Rod Adapter, ARRI Rosette Adapters, 15mm Rods, 501 ARRI Baseplate, Rosette Extension Arms, Rosette Handgrips, Mini Quick Release Plates, Cine Magic Arm, HDMI Clamp, etc.

Product Highlights

- HDMI Clamp.

- Prevents unwanted damage.

- Aerospace Grade Aluminum.

Key Features

• This HDMI Cable Clamp is designed to fit our SONY A7/A1 Cages. When installed, the cable clamp helps to prevent the cable from being unintentionally removed and damaging the cameras' HDMI port.

Dimensions 

• Material of Construction: Aerospace Grade Aluminum

• Mounting: NATO CLAMP

• Dimensions: 1.49 x 1.26 x .92".

• Weight: 0.6 oz.

*Includes 2.5 to 2.5mm Start/Stop cable

Top Handle Features:

• Modular Design: Reversible for EVF and Single or Dual NATO Points of Contact
• Start/Stop Record Button with LANC control cable
• Built-In NATO Rail on Top
• Five 3/8" Threaded Holes with ARRI Locator Pins for Antitwist Accessories 
• Multiple 1/4"-20 Hole Options for Mounting Accessories
• 15mm Side Rod Support for EVF or Monitors
• Cold Shoe Mount
• Comfortable and Ergonomic Grip Design

Dimensions: 

Weight: 

*Quick Guide for Camera Control Switch Modes:

"P": Canon EOS R, EOS R5, EOS R6, LUMIX S1H, Panasonic GH5, S5, Fuji XT4

"S": All Sony Cameras, URSA Mini, C300, C500, Z CAM