Watch the Sony FX3 in action with our Gear Here.

Sony FX3/FX30 Cage Features:

• Removable Arca Swiss Plate on the bottom of the cage, allowing compatibility with the new DJI Ronin.
• NATO rails on all sides of the cage
• The NATO rail on top is removable, allowing for the use of Sony's FX3 XLR top handle. *SOLD SEPARATELY*
• Multiple 1/4" and four 3/8" threaded holes with ARRI Locator Pins for Anti-twist accessories such as our Mini Quick Release Plates.
• *NEW* Safety Pin Cold Shoe: making sure your cold shoe accessories will NEVER slip out.
• Built-in Hex tools on the bottom of the cage.
• HDMI Clamp Included
• Modular design, allowing you to remove side plates if desired.
• Sony Camera Body Cap  *SOLD SEPARATELY*

Top Handle Features:

• Start/Stop Record Button. Supports both Sony LANC and Panasonic Protocols, providing Compatibility for most cameras such as Z CAM, Blackmagic, Sony, Canon, Panasonic, JVC, etc.
• Five 3/8" threaded holes with ARRI Locator Pins for Anti-twist Accessories such as our Mini Quick Release Plates
• Over Eighteen 1/4" hole options for mounting accessories
• 15mm Side Rod Support for EVF or Monitors
• Cold Shoe mounts on each end of the Handle
• Mounted via NATO Rail and can also slide on to both Left and Right Sides of Cage

Weighs: 9 oz

*Cage does not include Body Cap.

Optional Accessories Include: FF Single Rod Adapter, ARRI Rosette Adapters, 15mm Rods, 501 ARRI Baseplate, Rosette Extension Arms, Rosette Handgrips, Mini Quick Release Plates, Cine Magic Arm, HDMI Clamp, etc.

Base Rig MKII Consists Of:

• 1x Sony FX3 Cage
• 1x Talon XL Top Handle with Trigger REC for Cameras
• 1x 501 Adjustable Baseplate
• 1x FX3 Top NATO Rail
• 2x PPSH 15mm Rods (8 Inches)
• 1x Sony E Mount Cine Cap

Ultimate Rig Consists Of:

• 1x Sony FX3 Cage with Remote NATO Top Handle
• 1x ARRI/501 Universal Baseplate
• 1x Sony E-Mount Cine Cap
• 2x PPSH 12" Rods
• 1x Rosette Arm Bundle
• 1x V-Mount Battery Plate
• 1x FZ100 Dummy Battery to DC 1.35
• 1 x Shoulder Pad Air

PRODUCT DESCRIPTION

The KONDOR BLUE V-Mount Pro Battery Plate offers a long list of features to fit the Pro name. Loaded with a range of power output ports, the plate also features 2x USB C PD ports which are both capable of power output/input. On top of the plate are magnetic power contacts for KONDOR BLUE Expansion Modules.

The plate body is fully machined out of aluminum. The back of the plate features 4x ARRI-style anti-twist mounts with additional M4 mounts to connect the Battery Plate Rod Block which can be mounted in 8 different positions to best suit your rigging requirements.

The plate has been scaled down to be able to be better proportionally for the micro-sized batteries that have become increasingly popular. The Pro Battery Plate is backed by the KONDOR BLUE’s exceptional lifetime warranty and customer support.

PRODUCT DESCRIPTION

We took our 501 Baseplate back to the drawing board to give it a complete overhaul to add in some much-needed functionality. At the top of the list was to get as many of our camera cages to 85mm sensor to rail center offset for matte box compatibility. There are many height-adjustable baseplate options, but most start off too tall, mitigating the need for vertical height adjustment. It’s also easy for them to become loose and wobble or slip during a shoot. We addressed this by machining precise 1mm adjustments with corresponding laser engravings to make dialing in the baseplate height easy and accurate. We even have a guide for each cage we offer to let you know the exact position your baseplate should be set to.

We’ve also improved the 15mm rail clamps to have over double the clamping force without marring your rails. The M4 ratchet knobs are also captive and you won’t need to worry about losing them. Whether you’re using the 501 Drop-in Plate or mounting directly to the Baseplate Riser Block, you’ll be able to mount multiple bolts to any camera cage to prevent twisting. Swapping out mounting options is a breeze with slotted access from the underside of the baseplate. 

You have options for tripod mounting solutions as well. Mount tripod plates directly to the base with ⅜” and ¼” helicoil mounting holes or use the built-in dovetail clamp which pairs perfectly with our Lightweight Dovetail Plates.

As with all KONDOR BLUE products, long-term usability and functionality were meticulously considered with each cut, curve, and function. We know you’ll enjoy the added flexibility of the all-new KONDOR BLUE Adjustable 501 Baseplate.

Product Highlights

- 18", 12", 8", 6", 3" Threaded Rod 

- PPSH Barrel Design

- Lightweight

- Durable

- Aerospace-Grade Aluminum

- Extendable Options

Key Features

• Lightest aluminum rod in the industry without sacrificing strength.

• Used for accessories like follow focus, matte box, lens support, servo motors, and more.

• Extend to custom length with M12 Rod Extension Connectors (sold separately). 

Dimensions 

• Diameter: 15mm

• Thread size: M12

• Length: 18", 12", 8", 6", 3"

• Weight: [18" - 3 oz] [12" - 2 oz] [8" - 1.3 oz] [6" - 1 oz] [3" - 0.5 oz]

Talon Camera Cage Top Handle — Key Features:

• 2x Cold Shoes
• 2x Nato Rail
• 3x ⅜” ARRI Mount
• 2x ¼” ARRI Mount
• 1x Back Facing  ¼” Thread
• Built-in 4mm Hex Tool
• Molded Rubber Grip
• Bubble Level
• NATO Clamp 

Product Description:

The Talon is Kondor Blue’s answer to a compact camera cage top handle. But don’t let its size fool you because this thing is packed with useful features and—most importantly—it’s actually comfortable. The design of this camera cage top handle has been contoured to perfectly fit your hand with your pointer finger securely in the front and your middle, ring, and pinky fingers resting on a molded rubber pad.

Much like its namesake, the Talon camera cage top handle is meant to clasp all of your accessories with various mounting options. Starting at the front, a short NATO allows quick accessorizing or mounting any of our Monitor Mounts via the ⅜” ARRI Mount. Each side of the handle also features a ¼” 20 mount with anti-twist ARRI locating pin holes perfect for adding side rod support. The top features a cold shoe mount, two more ⅜ ARRI mounts pre-loaded with ⅜ to ¼ bushings, NATO rail, and our signature bubble level. Finally, the back has an additional cold shoe mount with a threaded ¼” 20 mount perfect for wireless mic receivers or other small accessories. 

The Talon camera cage top handle mounts via a NATO clamp and has a built-in 4mm hex tool to save you in a pinch with mounting other popular accessories. Designed with compact versatility in mind, the Talon is ready to be put to use without getting in the way. For our larger version, make sure to check out our Talon XL top handle.

Tech Specs:

• 160 gm/5.6 oz
• Length: 120mm/4.75”
• Mounted Height: 65mm/2.5”

These modular monitor cage rails will fit all the most popular monitor systems and allow you to mount NATO-compatible accessories such as handles, clamps, and articulating arms.

Interchangeable Anti-Twist Locator Pin inserts allow you to use all the most popular monitors and quickly secure them with a single bolt--SmallHD, PortKeys, Atomos, Blackmagic, Feelworld, etc.

Accessories can slide along the length of the monitor rail, and when it's time to pack up, disengage one of the spring-loaded pins at either end of the rail and slide your accessories off. 

Use these to quickly attach a monitor to your camera or to build out your custom Director's Monitor. 

1/4"-20 mounting screws are included, as is a hex wrench for installing the monitor cage rail. 

TECH SPECS:

• 2.0": 25g/.9 oz
• 3.5": 37g/1.3 oz
• 5.0": 51g/1.8 oz

These modular monitor cage rails will fit all the most popular monitor systems and allow you to mount NATO-compatible accessories such as handles, clamps, and articulating arms.

Interchangeable Anti-Twist Locator Pin inserts allow you to use all the most popular monitors and quickly secure them with a single bolt--SmallHD, PortKeys, Atomos, Blackmagic, Feelworld, etc.

Accessories can slide along the length of the monitor rail, and when it's time to pack up, disengage one of the spring-loaded pins at either end of the rail and slide your accessories off. 

Use these to quickly attach a monitor to your camera or to build out your custom Director's Monitor. 

1/4"-20 mounting screws are included, as is a hex wrench for installing the monitor cage rail. 

TECH SPECS:

• 2.0": 25g/.9 oz
• 3.5": 37g/1.3 oz
• 5.0": 51g/1.8 oz

PRODUCT HIGHLIGHTS

• Supports Monitors up to 7"
• Swivel 360° and Tilt 180°
• Locks in Desired Tension with Set Screws (See video)
• Aerospace-Grade Aluminum
• Tilt Nato clamp can be pivoted 90°

PRODUCTION DESCRIPTION

The KONDOR BLUE NATO to NATO Swivel-Tilt Monitor Mount is designed to attach your monitor to the camera cage or other mounting system. This monitor mount is one of a kind and sets a new standard for what to expect from your monitor mounts. The tension on both the tilt and swivel is adjustable and can be locked in via 3 set screws. Furthermore, the mount tilts and then swivels, making it much more versatile when mounted to the front of a top handle.

The tilt NATO can also be pivoted 90° to accommodate direct mounting to your cage or to the front of a top handle such as the Talon series which features a nato rail on the front of the top handle. The NATO to NATO mount also pairs well with the KONDOR BLUE director's monitor cage and mic shock mount.

TECH SPECS

• 75g/ 2.65oz
• 32mm W x 50 mm T (Inside NATO to inside NATO) x 32mm D

Product Highlights

- Attach a Rod to any NATO rail mount

- Lightweight

- Low-Profile

- Durable

- Aerospace-Grade Aluminum

Key Features 

• This NATO single rod clamp is normally used to attach a Follow Focus Gear to a rig without the need for a base plate system.

• The durable aluminum single rod clamp attaches to the cage via NATO rail to prevent twisting and loosening. A blue locking thumb screw tightens around a 15mm rod (which is sold separately).

Dimensions

• Mounting: 

• Dimensions: 

• Weight: 

 PRODUCT HIGHLIGHTS:

• Super lightweight at 7g
• Invisible mount focus rod
• ¼-20 mount for tight mounting locations
• Single Arri anti-twist pin

PRODUCTION DESCRIPTION:

Mounting a follow focus can sometimes be a pain. This tiny little mount helps to fix that. It is a ¼-20 mounting screw with a single Arri-mount anti-rotation pin. This makes mounting to the front of many camera cages super simple. Once mounted, screw on any compatible M12 screw (1.75mm thread pitch) to our 15mm rods. 

TECH SPECS:

• 7g/0.25 oz.
• 17mm W x 15.5mm T x 18.5mm D