Key Cage Features:

PRODUCT DESCRIPTION

The original KONDOR BLUE Mini Quick Release Plates have become a rigging essential and are ubiquitous throughout the industry. With micro revisions along the way, it was time to go back to the drawing board and create the ultimate Mini Lock System for professional camera accessories.

Not only is the design overhaul smaller, lighter, and more feature-rich, but it is also compatible with the original Mini Quick Release male plates, anti-twist cradles, and ecosystem accessories. This allows users to upgrade with confidence knowing their initial investments have not gone to waste.

Mounting security is paramount. There are several pro mounting options for the male quick release plate:

• Female ARRI style mount
• Male ¼ 20 ARRI style mount (3mm pins are removable and storable within the plate)
• NATO rail
• ¼ 20 or ⅜ 16 receiving threads
• ¼ 20 or ⅜ 16 mounting bolts
• Any of the above options combine with a centralized M4 set screw

The female Mini Lock receiver also received new mounting options. The receiving ⅜ 16 threads are now deeper for more security. Removable 3mm anti-twist ARRI style pins can also be added in either orientation. The outer profile continues to be compatible with KONDOR BLUE’s range of anti-twist cradles as well. Stainless steel mounting hardware for all the mentioned configurations is included with the kit. 

Because of the tiny footprint of the Mini Lock, achieving tight tolerances is critical for secure locking. The safety latch—which still features its unique ability to stay fixed when open—now features an integrated M4 nylon tip set screw. Using the included 2mm hex tool, a user can fine tune the plate-to-plate fit by simply adjusting the set screw. The nylon tip smoothly glides along the surface of the male quick release plate removing any potential play, all without marring the surface.

Each line, cut, and engraving has carefully been considered to enhance the reliability of Mini Lock. Available in a variety of colorways, the KONDOR BLUE Mini Lock System is the perfect solution for mounting crucial cinema accessories.

PRODUCT HIGHLIGHTS

• Adjustable ball heads on both ends
• 1/4"-20 mounting screw at each end
• Large thumbscrew to secure ball heads
• Removable ARRI style locator pins
• Strong and reliable articulating camera arm that can hold up to 15lbs

 

PRODUCT DESCRIPTION

• Featuring a 1/4"-20 screw at each end, the KONDOR BLUE Cine Camera Magic Arm Pro features a ball head extension rod for extra versatility and endless mounting options, allowing you to mount any accessory on your camera rig at almost any angle.
• It is an Articulating Friction arm (Israeli Arm) most commonly used to mount LCD Monitors, LED Lights, EVF Viewfinder, Microphones, Recorders, Flash, Wireless Transmitters, Go Pro Cameras, and beyond.
• Both ends of the arm feature a 1/4"-20 screw and two tightening thumbwheels for easy accessory mounting.
• The ball ends can be swapped out for separately available ball heads with 3/8"-16 screws and ARRI locating pins, or a separately available Cine Magic Arm Extension Bar can be used to chain another magic arm.

 

TECH SPECS 

• Top-Mount: 1/4"-20 Male
• Bottom Mount: 1/4"-20 Male
• Points of Articulation: 4
• Maximum Length: 10.2"
• Segment Length: 5.5"
• Weight: 9.3 oz

PRODUCT HIGHLIGHTS

Watch the video above to see all the features of our 1/4"-20 monitor mount in action.

• ARRI-pin tilt and pan monitor mount
• Supports monitors up to 7"
• Swivel 360° and tilt 180°
• Locks in desired tension with set screws (See video)
• Aerospace grade aluminum
• Removable 3mm locating pins 15mm on center

 

PRODUCT DESCRIPTION

Our 1/4"-20 Swivel Tilt Monitor Mount is designed to hold your monitor onto the camera cage or other mounting system featuring an ARRI 3/8” mount. Designed to be front mounted to any of the KONDOR BLUE Top Handles, the 1/4"-20 Swivel Tilt Monitor Mount lowers the center of gravity and allows for camera operation from either side of the camera with the swivel feature.

 

TECH SPECS

• Dimensions: 2.14” x 1.6” x 1.0”
• Weight: 1.8 oz

This area is used to describe your product’s details. Tell customers about the look, feel, and style of your product. Add details on color, materials used, sizing, and where it was made.