Kondor Blue Arri Pin Anti Twist Plate for our Mini Quick Release Plates (Sold Separately). This works with any high end camera cages that support threads with Arri locator pins and will keep your accessories from twisting or unscrewing while on the job.

Add this ARRI-Style Anti Twist Spacer Plate to your Kondor Blue Mini Quick Release Plate to prevent your accessory from twisting. The thin aluminum plate slides over the thread on the separately available quick release plate, allowing you to attach the assembly to a cage or rig with a compatible ARRI-style accessory connector.

Dimensions: 5" x 3" x 0.2"

Weight: 0.3 oz

Product Highlights

- Supports Monitors up to 7"

- Swivel 360° and Tilt 180°

- Locks in Desired Tension with Set Screws (See video)

- Aerospace-Grade Aluminum

- Tilt and Swivel Monitor Display Mount with Removable Locating Pins 

Description

• Our swivel monitor mount is designed to attach your monitor to the camera cage or other mounting system featuring an ARRI 3/8” mount.

Dimensions 

• Dimensions: 2.14” x 1.6” x 1.0”

• Weight: 1.8 oz

Product Highlights

- Adjustable Ball Heads on Both Ends.

- 1/4"-20 Mounting Screw at Each End.

- Large Thumbscrew to Secure Ball Heads.

-Strong and Reliable Articulating Camera Arm that can hold up to 50lbs.

Key Features

• Featuring a 1/4"-20 screw at each end, The Kondor Blue Cine Camera Magic Arm Pro features a ball head extension rod for extra versatility and endless mounting options, allowing you to mount any accessory on your camera rig at almost any angle. 

• It is an Articulating Friction arm (Israeli Arm) most commonly used to mount LCD Monitors, LED Lights, EVF Viewfinder, Microphones, Recorders, Flash, Wireless Transmitters, Go Pro Cameras, and beyond.

• Both ends of the arm feature a 1/4"-20 screw and two tightening thumbwheels for easy accessory mounting.

• The ball ends can be swapped out for separately available ball heads with 3/8"-16 screws and ARRI locating pins, or a separately available Cine Magic Arm Extension Bar can be used to chain another magic arm.

Dimensions 

• Top-Mount: 1/4"-20 Male

• Bottom Mount: 1/4"-20 Male

• Points of Articulation: 4

• Maximum Length: 10.2"

• Segment Length: 5.5" 

• Weight: 9.3 oz

 Key Features

• This 3/8" ball head can replace the 1/4" ball head mount and add extra security and stability due to the ARRI-style locator pins which prevent twisting and loosening. 

• You can tighten this to cages or any accessories via the thumbscrew or really torque down on it with a hex spanner through the slotted hole.

• This is compatible with most Magic Arms, Friction Arms, and Israeli Arms using a dual ball head system.

• This aluminum Ball Head with 3/8"-16 ARRI-Style Anti-Twist Screw is designed to be used with the various ball head magic arms and ball head clamps. Your accessory secures using the thumbscrew and you can add torque by using an Allen wrench.

• One end secures into the magic arm or clamp and the other end features a 3/8"-16 thumbscrew with ARRI-style, anti-twist locating pins for securely attaching accessories. The ball end features a blue rubber gasket for additional grip.

Dimensions 

• Material of Construction: Aerospace Grade Aluminum, Rubber.

• Mounting: 1 x Ball Head, 1 x 3/8"-16 Screw with ARRI-Style Locating Pins.

• Length: 2.5”

• Dimensions: 2.5” x 0.98” x 0.98”

• Weight: 1.7 oz

Product Highlights

Magic Arm Camera Mounts

- Premium Bearings allow for smooth tightening.

- Large Thumb Knob for easy use.

- Aerospace-Grade Aluminum.

Key Features

• Custom build your own Double-Ball Head arm with this center clamp. 

• Enables you to clamp any ball head accessories from our selection of magic arm camera mounts.

• Compatible with most ball heads in the industry.

Dimensions 

• Material of Construction: Aerospace-Grade Aluminum, Rubber

• Length: 

• Dimensions: 

• Weight:

Product Highlights

Double-Ball Head 4” Magic Extension Bar

- Ball Heads on Both Ends.

- One 3/8"-16 and two 1/4"-20.

- Aerospace-Grade Aluminum.

Key Features

• Extend your accessory magic arm mounts with this Cine Magic Arm Extension Bar with Double Ball Head. The durable metal bar features two ball heads on either end, which connect to a magic arm with a ball head clamp, allowing your setup to be adjustable and flexible.

• This double ball mount enables you to adjust the height and position of magic arms in infinite ways, making this the most versatile mounting solution for your camera accessories!

• This is compatible with most Magic Arms, Friction Arms, and Israeli Arms using a dual ball head system.

• The center of the bar features one 3/8"-16 and two 1/4"-20 accessory threads for mounting additional accessories. The ball head ends feature built-in rubber gaskets for a better grip within a socket.

Dimensions 

• Material of Construction: Aerospace-Grade Aluminum, Rubber

• Mounting: 2 x Ball Ends, 2 x 1/4"-20 Threads, 1 x 3/8"-16 Thread

• Length: 3.8”

• Dimensions: 3.8” x 1” x 1”

• Weight: 1.4 oz

Product Highlights

- 1 Ball Head.

- One 1/4" 20 screw.

- Aerospace Grade Aluminum.

Key Features

• This 1/4"-20 screw ball head can replace the 3/8" version. You can tighten this ball head mount to cages or any accessories very tightly with a hex spanner through the slotted hole. This is compatible with most Magic Arms, Friction Arms, and Israeli Arms using a dual ball head system.

Dimensions 

• Material of Construction: Aerospace Grade Aluminum, Rubber.

• Mounting: 1 x Ball Head, 1 x 1/4" 20 screw.

• Length: 2.3”

• Dimensions: 2.3” x 0.98” x 0.98”

• Weight: 1.2 oz

Key Features

• This ARRI 3/8" Accessory mount ball head can replace the 1/4" version and add extra security and stability due to the Arri style locator pins which prevent twisting and loosening.

• You can now screw on any accessories including our popular Mini Quick Release Plates!

• This is compatible with most Magic Arms, Friction Arms, and Israeli Arms using a dual ball head system.

Dimensions 

• Material of Construction: Aerospace Grade Aluminum, Rubber.

• Mounting: 1 x Ball Head, 1 x female 3/8"-16 Threads with ARRI-Style Locating Pins.

• Length: 2.5”

• Dimensions: 2.5”x0.98”x0.98”

• Weight: 1.7 oz