Watch the FX3 in action with our Gear Here.

Rig Consists Of:

• 1x Sony FX3 Cage with Remote NATO Top Handle
• 1x FX3 Top NATO Rail
• 1x ARRI/501 Universal Baseplate
• 1x Sony E Mount Cine Cap
• 2x PPSH 15mm Rods (8 Inches)

Space Gray Kondor Blue Cage Features Include:

• Built-in Arca Swiss Plate on the bottom of the cage, allowing compatibility with the new DJI Ronin.
• NATO rails on all sides of the cage.
• The NATO rail on top is removable, allowing for the use of Sony's FX3 XLR top handle.
• Multiple 1/4" and four 3/8" threaded holes with ARRI Locator Pins for Anti-twist accessories such as our Mini Quick Release Plates.
• *NEW* Safety Pin Cold Shoe: making sure your cold shoe accessories will NEVER slip out.
• Built-in Hex tools on the bottom of the cage.
• Modular design, allowing you to remove side plates if desired.

Top Handle Features:

• Start/Stop Record Button. Supports both Sony LANC and Panasonic Protocols, providing Compatibility for most cameras such as Z CAM, Blackmagic, Sony, Canon, Panasonic, JVC, etc.
• Five 3/8" threaded holes with ARRI Locator Pins for Anti-twist Accessories such as our Mini Quick Release Plates
• Over Eighteen 1/4" hole options for mounting accessories
• 15mm Side Rod Support for EVF or Monitors
• Cold Shoe mounts on each end of the Handle
• Mounted via NATO Rail and can also slide on to both Left and Right Sides of Cage

Rig Weighs: 24 oz

Dimensions of Base Rig without rods: 9.5” x 4.5” x 3” (Height is 7” without top handle)

Optional Accessories Include: FF Single Rod Adapter, ARRI Rosette Adapters, 15mm Rods, 501 ARRI Baseplate, Rosette Extension Arms, Rosette Handgrips, Mini Quick Release Plates, Cine Magic Arm, HDMI Clamp, etc.

Watch the FX3 in action with our Gear Here.

Space Gray Kondor Blue Cage Features Include:

• Built-in Arca Swiss Plate on the bottom of the cage, allowing compatibility with the new DJI Ronin.
• NATO rails on all sides of the cage
• The NATO rail on top is removable, allowing for the use of Sony's FX3 XLR top handle. *SOLD SEPARATELY*
• Multiple 1/4" and four 3/8" threaded holes with ARRI Locator Pins for Anti-twist accessories such as our Mini Quick Release Plates.
• *NEW* Safety Pin Cold Shoe: making sure your cold shoe accessories will NEVER slip out.
• Built-in Hex tools on the bottom of the cage.
• HDMI Clamp Included
• Modular design, allowing you to remove side plates if desired.
• Sony Camera Body Cap  *SOLD SEPARATELY*

Top Handle Features:

• Start/Stop Record Button. Supports both Sony LANC and Panasonic Protocols, providing Compatibility for most cameras such as Z CAM, Blackmagic, Sony, Canon, Panasonic, JVC, etc.
• Five 3/8" threaded holes with ARRI Locator Pins for Anti-twist Accessories such as our Mini Quick Release Plates
• Over Eighteen 1/4" hole options for mounting accessories
• 15mm Side Rod Support for EVF or Monitors
• Cold Shoe mounts on each end of the Handle
• Mounted via NATO Rail and can also slide on to both Left and Right Sides of Cage

Weighs: 9 oz

Optional Accessories Include: FF Single Rod Adapter, ARRI Rosette Adapters, 15mm Rods, 501 ARRI Baseplate, Rosette Extension Arms, Rosette Handgrips, Mini Quick Release Plates, Cine Magic Arm, HDMI Clamp, etc.

The Extensions have holes that allow users to tighten parts securely to the Base Extension Rod.

The Wheeled Lens Support is intended for lenses that do not have room for the V Lens Support and can rest on areas of the lens that still require rotation.

The single-sided rail block allows users to mount or remove support without having to remove other accessories that are mounted along with their rig.

Camera Lens Support Kit Features:

• Single-sided rail block
• Base Extension Rod (13.5mm travel)
• Wheeled Lens Support
• V Lens Support
• 3mm mount - 15mm extension
• ¼” 20 mount - 15mm extension
• ⅜” 16 mount - 15mm extension

Product Highlights

LWS ARRI 15mm Bridge Plate 

- Quick Release camera plate system

- ARRI-standard dovetail

- 15mm LWS rod support

- Rubber Padding

Key Features

• Our Bridge Plate supports 15mm LWS rods and the industry-standard ARRI dovetail connection making it ideal to build your large setups. 

• 1/4"-20 and 3/8"-16 mounting screws

• 1/4"-20 and 3/8"-16 tripod mount threads

Dimensions 

• Mount Types: 1/4"-20 and 3/8"-16 Male, 1/4"-20 and 3/8"-16 Female, ARRI-Standard Dovetail

• Rod Support: 15 mm LWS

• Dimensions: 3.5" x 4.3" x 1.3"

• Weight: 14.7 oz

• Our Quick Release Riser Plates provide the standard 85mm lens height for these cameras: 

• Alexa Mini
• RED KOMODO
• URSA Mini (4K/4.6K/12K)
• BMPCC 6K Pro (With our Cage)
• Sony FX6
• Sony Venice
  
• Sony Rialto
• Sony F55 and F5
• Canon C70 (With Our C70 Bottom Plate)

COMING SOON - Camera Specific Riser Plates to Support the following: 

• Sliding ARRI Standard Dovetail Design
• Balances Front- or Back-Heavy Equipment
• Safety Latch
• 12 x 1/4"-20 and 5 x 3/8"-16 Threads
• Weighs 8oz / 225g

Product Highlights

- PPSh Barrel Design

- Lightweight

- Durable

- Aerospace Grade Aluminum

- Extendable Options

Key Features

• Lightest aluminum rod in the industry without sacrificing strength.

• Used for accessories like follow focus, matte box, lens support, servo motors, and more.

• Extend to custom length with M12 Rod Extension Connectors (sold separately). 

Dimensions

• Diameter: 15mm

• Thread size: M12

• Length: 8"

• Weight: 1.3 oz

Product Highlights

- Features multiple DC outputs.

- Can charge a Battery.

- Aerospace Grade Aluminum.

- 15mm rod connectors.

Key Features

• Our Thin V-Mount Battery Plate features multiple DC outputs (5, 7.4, 12, 15V, and a D-Tap), enabling you to power multiple devices simultaneously.

• Battery Plate also features two 15mm rod connectors, allowing you to mount it to an existing rig via two blue locking levers. 15mm rods are sold separately.

• The plate includes a switchable 7.4/8.4V 1.35mm barrel output, a 5V 2.5mm barrel output, a 12V 2.5mm barrel output, and a D-Tap output.

• The 2.5mm DC barrel charger input allows you to charge the mounted battery with our AC Charger Cable (sold separately). This port will also allow you to power your plate and accessories if no battery is mounted.  (BLINKING light means charger cable is plugged in but no battery is mounted; GREEN light means the battery is fully charged; RED light means Battery is charging)

• Power Input:

1. DC Jack: 19V

• Power Output:

1. D-Tap: 14.4V
2. DC Jack: 15 V
3. DC Jack: 12 V
4. DC Jack: 7.4 to 8.4 V
5. DC Jack: 5 V

Dimensions 

• Dimensions: 6” x 4.2” x 1.8”

• Weight: 9.6 oz

Add comfort and function to your Sony FX3 XLR Top Handle.

SONY FX3 XLR HANDLE UNIT FEATURES:

• NATO rail along the top 
• Cold Shoe receiver on the back end
• 6x 1/4" Threads and 4x ARRI 3/8 mounting points
• Extends the length of the handle for a much better ergonomic grip 

These modular monitor cage rails will fit all the most popular monitor systems and allow you to mount NATO-compatible accessories such as handles, clamps, and articulating arms.

Interchangeable Anti-Twist Locator Pin inserts allow you to use all the most popular monitors and quickly secure them with a single bolt--SmallHD, PortKeys, Atomos, Blackmagic, Feelworld, etc.

Accessories can slide along the length of the monitor rail, and when it's time to pack up, disengage one of the spring-loaded pins at either end of the rail and slide your accessories off. 

Use these to quickly attach a monitor to your camera or to build out your custom Director's Monitor. 

1/4"-20 mounting screws are included, as is a hex wrench for installing the monitor cage rail. 

Product Highlights

- Articulating double-ball head friction arm

- NATO Clamps on Each End.

- Large Thumbscrew to Secure Ball Heads.

- Aerospace-Grade Aluminum.

Key Features

• The Cine Magic Arm with Double Ball Heads can be used to mount your accessories on your camera rig at almost any angle.

• Compatible with a wide range of camera components such as monitors, small lights, or sound gear, both ball heads are secured using the single, large thumb lever.

•• The ball ends can be swapped out for separately available ball heads with 1/4" screws, 3/8" screws with ARRI locating pins, NATO Clamps, 15mm Rod clamps,  3/8" threaded accessory mount hole, our Mini Quick Release Plate to Ball Head Adapter, or  Cine Magic Arm Extension Bars that can be used to chain and extended multiple magic arms together.

Dimensions 

• Points of Articulation: 2

• Segment Length: 5.5" 

• Weight: 5.1 oz

Kondor Blue Male-to-Female XLR Cable for on-camera shotgun mics.

This cable connects any XLR mic to the camera's 48V phantom powered XLR port with the 3-pin XLR male connector, and on the other end is a standard 3-pin XLR female connector to plug into your mic or mixer.

Connector 1: 1 x 3-Pin XLR Male

Connector 2: 1 x 3-Pin XLR Female

Product Highlights

- Right-Angle Connectors.

- Power Monitor, Light, Accessory.

- D-Tap 5.5 x 2.5mm to DC Barrel.

- Coiled Cable, 16" to 50" in Length.

Key Features

• For use with Canon C70, Aputure Amaran Light, LCD Monitor, LED Light, DSLR, Blackmagic Video Assist, Small HD, Ninja V, V-Mount Anton Bauer Gold Mount Battery Power Rig.

• Use this Coiled D-Tap to DC 5.5 x 2.5mm Barrel Cable to power the Canon C70, a monitor, light, or other accessory using an external D-Tap battery. One end of the coiled cable features a 5.5 x 2.5mm DC barrel right-angle connector, and the other end features a male D-Tap right-angle connector. The coiled cable can extend from 16" to 50" in length.

-Compatible with Atomos Battery Eliminator

Dimensions

• Connector 1: 1 x D-Tap Male (Right-Angle).

• Connector 2: 1 x DC Barrel Male (Right-Angle).

• Barrel Size: 2.5 mm inner, 5.5 mm outer.

• Cable Length: 13.3-19.3"

• Weight: 1.1 oz

KONDOR BLUE HDMI to HDMI monitor cable with High Speed 4K 3D. Nylon Braided Male Cable 30 Hz HDMI 2.0 18Gbps HDR Metadata

Connect your video camera to your on-camera monitor with our coil-extending High-Speed HDMI Cable. It supports 4K 30 Hz and 3D video and features a nylon braid. Also, check out our Limited-Edition Gerald Undone HDMI to HDMI cable (purple).

Connector 1: HDMI Type-A Male

Connector 2: HDMI Type-A Male

Cable Length: 12"-24" 

Weight: 1 oz

Maximum Resolution Support: 4096 x 2160 at 30 Hz

3D Support: Yes 

Jacket Type: Nylon

Kondor Blue HDMI to HDMI monitor cable with High Speed 4K 3D. Nylon Braided Male Cable 60 Hz HDMI 2.0 18Gbps HDR Metadata

Connect your video camera to your on-camera monitor with our coil extending High-Speed HDMI Cable. It supports 4K 60 Hz and 3D video and features a nylon braid.

Connector 1: HDMI Type-A Male (Right Angle)

Connector 2: HDMI Type-A Male (Left Angle)

Cable Length: 12"-24" 

Weight: 1 oz

Maximum Resolution Support: 4096 x 2160 at 60 Hz

3D Support: Yes 

Jacket Type: Nylon